Accessories


Portable Sample Pump click photos for larger view

		Portable Sample Pump
	•	Handles wide pressure ranges from 14"Hg. to 10psig.
	•	Designed for Class 1, Div. 2, Group C,D Area Classifications
	•	Long life pump and motor, 20,000 + hrs. continuous
	•	Unique pump diaphragm that is virtually non diffusive for low level trace applications
	•	Rechargeable NiCad batteries operates for 4 hours continuously on a full charge

Or call:
714.848.5533


"Guardian" Liquid Rejection Membrane click photos for larger view

		"Guardian" Liquid Rejection Membrane
	•	Unique membrane and diaphragm design prevent the occasional slugs of liquid gunk traveling down the gas pipeline from flooding out expensive analytical equipment. Prevents costly repair and down time.
	•	Break through check valve allows gas to flow in one direction only. This prevents "Air" from being drawn into a flammable gas pipeline via the exhaust port in the event the gas field suddenly experiences a vacuum condition.
	•	Available with or without pressure reducing regulator
	•	The Guardian automatically drains liquids back into the pipeline without the need for a bypass gas port, which wastes considerable amounts of flammable gas.

Or call:
714.848.5533


Demister click photos for larger view

		Demister
	•	Very efficiently cools hot saturated sample gas to ambient temperature, causing liquids to coalesce into droplets and return via gravity back to the gas pipeline. The Demister prevents liquids from accumulating down stream in expensive analytical instruments causing costly repairs and down time.

Or call:
714.848.5533


Extreme weather Enclosure click photos for larger view

		Extreme Weather Enclosure
	•	NEMA 4X Enclosure allows for our heated Model 210BR, 2010BR and 3010BR to be quickly and easily mounted in place for use in extreme cold, wet and windy weather conditions down to -40° F.
	•	Enclosure is predrilled, insulated, powder coat painted and supplied with all hardware for quick and simple installation.
	•	Hardware includes: Explosion proof couplings, explosion proof seal-offs, 316S.S. tubing and gas fittings.
	•	Dimensions: 21.5"W x 16.5"H x 6.5"D

Or call:
714.848.5533


Flexible, High Pressure, Non-diffusive Sample/Calibration Tubing click photos for larger view

		Flexible, High Pressure, Non-diffusive Sample/Calibration Tubing
	•	This unique high pressure, non-diffusive sample gas tubing is outfitted with special connection fittings. Designed with an o-ring/swage seal and requiring only finger tightening, the tubing and fittings are rated up to 6,500psig. It continues to provide a leak tight seal even after thousands of connections without causing damage to the female portion of the compression fittings, generally attached to the expensive gas analyzers.
	•	With conventional fittings, damage often occurs after just one reconnection simply due to the metal-to-metal swaging design, resulting in gas leaks. Even very minute leaks can wreak havoc with low level ppm oxygen measurements.
	•	In addition, the plastic tubing is filled with a Kevlar fiber making it virtually non-diffusive and well suited for high pressure applications. This makes for a perfect choice when performing routine calibrations for most gas analyzers, especially trace oxygen.
	•	Other plastic tubing such as: Teflon, Tygon, Nylon or Polyethylene diffuse oxygen generally in the range of 2ppm to 100ppm of oxygen per 15' lengths. The amount of diffusion depends on temperature, flow and pressure. Previously, low level trace oxygen measurement required stainless steel or other metallic tubing which is much too cumbersome and prone to failure for routine calibrations.
	•	Available for all 1/4" swage type compression fittings.
	•	6,500psig. rating

Or call:
714.848.5533


Auxiliary Power Adapter click photos for larger view

		Auxiliary Power Adapter
	•	Our auxiliary power adapter allows you to recharge the batteries on all AMI portable gas analyzers using the cigarette/auxiliary power adapter in your vehicle.
	•	This handy accessory allows you to keep working in the field without down time in the event you forget to adequately charge your batteries the night before and find yourself miles away from AC power.

Or call:
714.848.5533


Protective Carrying Case click photos for larger view

		Protective Carrying Case
	•	This rugged protective carrying case extends the life of our portable gas analyzers in the most demanding and hazardous environments.
	•	It is lined with a thick die cut foam providing complete protection to your portable analyzer during travel and storage periods. The die cut foam also has built in compartments for the battery charger and quick disconnect fitting, as well as the flexible tubing and Liquid Rejection Probe accessories.
	•	These compartments not only protect them, they keep all the necessary components together and organized.

Or call:
714.848.5533


Calibration Gas Nipple with O-ring click photos for larger view

		Calibration Gas Nipple with O-ring
	•	This gas nipple with o-ring seal eliminates common leaks associated with imperfect metal to metal surfaces that are common when mating high pressure gas cylinders to pressure reducing regulators.
	•	Leaks of any type are unacceptable while attempting to calibrate low level trace oxygen analyzers.
	•	This inexpensive brass nipple and o-ring combination provides a simple and reliable solution to the common occurrence of leaks produced by metal to metal connections.
	•	This nipple will fit any pressure reducing regulator inlet with a ¼" NPT inlet port.

Or call:
714.848.5533

Home • Trace O2 • Percent O2 • O2 Deficiency Monitors • O2 Sensors
PPM in O2 Natural Gas • Request Quote • Company Profile