AMI guarantees higher quality and exceptional services at a lower price.

REQUEST QUOTE

DOWNLOAD PDF

Or call us at: 714.848.5533

The AMI Model 60 is a smart low cost choice for OEM applications when features such as displays, alarms, and multiple ranges are not required or become redundant in your system design.

The Model 60 is accurate and linear throughout its entire range. Its single measurement range is available as low as 0-1% or up to 0-100% full scale.

This device is simple to install, requires minimal space, < 5mA. of power, and is suitable either for inert gas streams, or for streams containing flammable gases.

 

Click Here For a Free Quote

  • Single measurement range
  • RFI protected
  • Analog output
  • Power requirements: 10-28VDC <1 watt
  • Low minimum detection limit
  • Excellent repeatability
  • Weather tight package
  • Barbed fittings for gas connections. Optional ¼" compression fittings or diffusion screen
  • Low cost and virtually maintenance free over its entire life
  • Requires no support or calibration gases, other than ambient air if desired
  • Area Classification: Designed to meet General Purpose requirements
  • Unaffected by changes in flow rate from 0.1 to 5.0 SCFH
  • Wall mount. Supplied with wall mount bracket.
  • Compact size
  • 2 year warranty for analyzer parts and labor. 6-month warranty for P-2 sensor

  • Single measurement range: 0- 25%
    Optional ranges: 0-1%, 0 -5%, 0-10%, 0-50% or 0-100%
  • Analog output signals: 0-2.5VDC for 0-25% range
    0-2.5VDC output for optional measurement ranges: 0-1%, 0-5%, 0-10%, 0-50%
    0-4.00VDC output for optional measurement range: 0- 100%
    Note: Customer must supply span control function
  • Power requirements: 10-28VDC <1 watt
  • Minimum detection:
    0.01% of oxygen
  • Repeatability:
    +/- 0.2% of range or +/- 0.1% of oxygen, whichever is greater
  • Operating temperature range:
    32° to 115° F
  • Diurnal temperature specification:
    < +/- 3 % of scale over temperature range
  • 90% full scale response times for specified range
    0-25% <10 seconds
    0-100% < 35 seconds
  • Area Classification: Designed to meet General Purpose requirements
  • Inlet gas pressure for models using flow-through style fittings :
    Standard barbed fittings: 1.0 to 30psig recommended. User must supply flow control from 0.1 to 5.0 SCFH
    Optional ¼" compression fittings: 1.0 to 30psig recommended. User must supply flow control from 0.1 to 5.0 SCFH
    Optional diffusion screen: For area monitoring at atmospheric pressure
  • Wetted parts: plastic barbed fittings, anodized aluminum body
  • Unaffected by changes in flow rate from 0.1 to 5.0 SCFH
  • Mounting: Wall mount with bracket
  • Dimensions: 1.80" D. x 2.00"L
  • Weight: <1 lbs.